High and low temperature cycle test

As we all know, in the natural environment, temperature and humidity are two inseparable natural factors. Different regions have different temperature and humidity effects due to different geographical locations.

To achieve such a certain temperature test, it is necessary to rely on the high and low temperature cycle test.

High and low temperature cycle test is one of the product environmental reliability test.

Basically all products are stored in a certain temperature environment, or work operation.

In some environments, the temperature changes constantly, when high and low.

For example, day and night in some areas with large temperature differences.

Or the product in the process of transportation, storage, operation repeatedly in and out of the high temperature area, low temperature area.

Such a high and low temperature environment may reach above 70°C degrees or even higher at high temperature, and the low temperature may reach below-20°C degrees or even lower.

Electronic products generally, after the temperature test, if they can meet the following basic requirements, the product is considered to meet the high and low temperature requirements.

(1) No damage, deformation and other defects of the product surface. If coated surface, there should be no coating peeling, foaming or discoloration.

(2) For plastic parts, there is no crack, foaming and deformation on the surface.

(3) Rubber products without aging, bonding, softening and cracking phenomenon.

(4) There is no flow in the welding part of the product parts.

(5) The performance data and structural functions of the product meet the requirements of technical conditions and should not appear any other defects that hinder the normal work of the product.

High and low temperature experiment is used for both large or large electronic, automobile, rubber, plastic and communication equipment or large products for temperature and humidity environment test.

So as to judge the product reliability and stability of energy and other parameters are qualified.

High and low temperature test test will provide you to predict and improve the quality and reliability of the product!

评论

此博客中的热门博文

NOM certification

Electric blankets must obtain CE certification to export to the EU

C-Tick certification