Shenzhen United Testing Technology Co., Ltd

  SRRC Certification is a mandatory certification of radio transmission equipment in China to ensure its spectrum use compliance and avoid interference. Products required for certification include: 1. Wireless communication equipment: mobile phones, routers, Bluetooth headset, etc. 2. Wireless remote control: toys, drones. 3. Wireless microphone and amplification system. 4. Radio navigation equipment. 5. Radio intercom. 6. Radio broadcasting and transmitting equipment. 7. Other radio-spectrum equipment. It shall not be sold and used in China without SRRC certification.

Suitable for external lighting, signal devices and automotive lamp shell protection, can provide realistic analog electronic products and their components during the transportation and use of the spray test may be subjected to water and other environment, to detect the waterproof performance of various products. Common operation mode 1.Preparation: First, select a test device that can simulate the real rainfall conditions. A spraying system or spray device can be used to ensure a uniform and continuous flow of rainwater. 2.Sample preparation: Cut the material to be tested into the appropriate size, usually square or rectangular. Ensure that the edges of the sample are flat, with no obvious defects. 3.Install the samples: attach the sample to the device to ensure full level and withstand rain. 4.Adjust test parameters: adjust the operating parameters of the shower, such as flow and spray Angle. 5. Experimental: turn on the shower and start the experiment. Usually the experiment lasts fo...

The vibration test methods can be divided into sinusoidal vibration and random vibration: Sinusoidal vibration is often used in the laboratory test method, to simulate rotation, pulsation, shock (in ships, aircraft, vehicle, space aircraft) on the vibration and the resonance frequency analysis of product structure and little note to pick up card is given priority to, it is divided into two kinds of sweep vibration and fixed frequency vibration, the harsh degree depends on the frequency range, loss amplitude, test duration. Random vibration is assessed as the seismic resistance strength of the overall structure of the fire module product and the delivery environment in the packaging state, and its severity depends on the frequency range, GRMS, test duration and axial direction.

1. Electromagnetic compatibility (EMC): harassment power, radiation harassment, terminal harassment voltage, electrostatic discharge immunity, electromagnetic radiation immunity, conduction immunity, etc. 2, low voltage part (LVD): harmonic current, voltage fluctuation and flicker, current intensity, instantaneous voltage, etc.

The specific items of the food contact material testing of the juicer are as follows: 1. Stainless steel knife head test items: Total chromium 2. PP material test items: Specific gravity Melting point (only for PP) n-hexane extractives Xylene extractives

The purpose of low temperature test is to test whether the product can be stored and controlled in a long-term low temperature environment, which is to determine the adaptability and durability of military and civilian equipment for storage and work at low temperature conditions. Physicochemical properties of materials at low temperature. The standard has specification requirements for pre-test treatment, initial test test, sample installation, intermediate test, post-test treatment, heating speed, load condition of the temperature cabinet, and volume ratio of the measured object to the temperature cabinet. Failure mode of specimen under low temperature condition: the parts and materials used in the product may be cracked, embrittlement, movable part stuck, and characteristic change at low temperature.

  The immersion pressure test box is a special equipment used to simulate the underwater environment. It can detect the waterproof performance of all kinds of electronic products according to different IP grades and waterproof standards. The purpose is to verify whether the product can work properly and remain safe and reliable when it encounters a wet environment such as rain, rivers and oceans. T est requirements Test water temperature: according to the actual use environment of the product, choose the corresponding water temperature, generally at room temperature or slightly higher than room temperature. Test time: determine the immersion time according to the waterproof grade requirements stipulated in the relevant standards. Generally ranges from 30 minutes to 2 hours. Test content: immerse the tested product completely in water to ensure that all openings and gaps are covered by water. At the same time, it is necessary to simulate the immersion scene that the product may enco...

  -Valve-controlled lead-acid storage battery (IEC / EN60896 / GB19638) -Starting type lead-acid battery (IEC60095 / GB / T5008) -General-purpose battery pack (IEC / EN61056) -Traction storage battery (IEC/EN60254/GB/T7403.1-2008) -Nickel-metal hydrogen (cadmium) battery (IEC / EN61951 / GB22084) -Primary cell (IEC60086), etc

  Intelligent switch   is   the unit that uses the combination and programming of the control board and electronic components to realize the circuit intelligent switch control. Switch control, also known as BANG-BANG control, is simple and easy to implement, so it is adopted in the control of many household appliances and lighting lamps. Intelligent switch belongs to AV / IT products, entering the US market needs to apply for FCC-ID certification. Contact us if you need. www.uni-lab.hk/

  FCC-ID is mandatory for active wireless transmission equipment. After passing the test, it will be issued by CCB institutions and registered on the FCC official website. The common test criteria are as follows:

Intelligent lock is a kind of lock integrating electronic technology, mechanical technology and network technology. Compared with the traditional mechanical lock, it has been improved in security, convenience and intelligence. Intelligent   lock in the process of continuous development, its networking way is also constantly changing.   At present, the common networking ways of smart locks on the market mainly include: Wi-Fi, Bluetooth, Zigbee, NB-IOT, etc. Intelligent   door lock needs to be RF tested in a professional wireless laboratory, our laboratory has passed the CNAS and A2LA recognition, can do the EU CE-RED, American FCC-ID, Canada I C -ID and Japan TELEC certification.