Immersion pressure test box

 The immersion pressure test box is a special equipment used to simulate the underwater environment. It can detect the waterproof performance of all kinds of electronic products according to different IP grades and waterproof standards.

The purpose is to verify whether the product can work properly and remain safe and reliable when it encounters a wet environment such as rain, rivers and oceans.

Test requirements

Test water temperature: according to the actual use environment of the product, choose the corresponding water temperature, generally at room temperature or slightly higher than room temperature.

Test time: determine the immersion time according to the waterproof grade requirements stipulated in the relevant standards.

Generally ranges from 30 minutes to 2 hours.

Test content: immerse the tested product completely in water to ensure that all openings and gaps are covered by water.

At the same time, it is necessary to simulate the immersion scene that the product may encounter in the actual use, such as different angles of tilt, vibration, etc.

plant parameter

The main parameters of the water-immersion test box include:

Size: According to the actual needs, select different specifications of the test box, to meet the product testing requirements of different sizes and weights.

Volume: The volume of the test box depends on the size and quantity of the tested product to ensure sufficient space for immersion testing.

Material: the material of the test box should have good corrosion resistance and aging resistance, generally made of stainless steel or high strength plastic.

Temperature control: The test box shall have an accurate temperature control system to achieve the accurate control of the test water temperature.

Time control: To facilitate timing and operation, the test box should be equipped with a time control system to automatically end the test at a predetermined time.

Dipping mode: the test box should have different immersion modes, such as vertical immersion, inclined immersion, etc., to simulate the product may be encountered in the actual use of various immersion scenarios.

Safety protection: In order to ensure safe operation, the test box should be equipped with emergency stop button and safety warning mark to quickly cut off the power supply in an emergency.

mode of operation

Set the immersion time according to the waterproof grade requirements, and start the time control system.

Conduct the immersion test according to the set conditions, during which the product status and reaction can be observed at any time.

After the immersion test, remove the product and quickly dry it with a clean cloth.

Test the functions of the product to assess the impact of immersion on product performance and service life.

Record and analyze the test data to provide the basis for product quality control and waterproof performance optimization.

Clean the inside of the test box to avoid the next test results.

Regularly check the integrity of the functions and parts of the equipment during use to ensure the normal operation of the equipment.

评论

此博客中的热门博文

C-Tick certification

IC certification

NOM certification